Skip to main content

Paper Processing Seals and Gaskets

Markets
Materials

Applications

Inflatable seals solve a number of unique problems in the pulp and paper industry. Paper-manufacturing equipment can be large and controlling tolerances between mating pieces of equipment, or accounting for the thermal expansion/contraction of metal, can be nearly impossible with traditional sealing technology. Use of an inflatable, paper-processing seal in these circumstances would absorb these variations. In addition, clamping large rolls of paper or pushing long doctor blades can be handled more easily with a product that efficiently accounts for tolerance variations.

Inflatable Clamp/Actuator for Doctor Blades

Inflatable bladders are used to clamp doctor blades of varying thicknesses in their holders, and to apply uniform pressure along the blade length in inkers, coaters, and other critical doctor blade applications. These bladders are typically manufactured in long lengths up to 50 feet (15.24 meters) using molded, fabric reinforced profiles.

Inflatable Brakes/Stops for Conveyor Applications

Inflatable clamps configured with two sealed ends can be positioned along the sides of the conveyor belt or rolls, and inflated against the product to temporarily interrupt the flow while the jam clears downstream. Alternately, the bladders can be located underneath the conveyor and activated to release the contact between belt and rollers.

Shaft Shutdown Inflatable Seal

Inflatable seals provide an excellent temporary shaft seal during shutdown and maintenance operations. The seal can be inflated against the stationery shaft while packing or when mechanical seals are being changed, thereby eliminating the necessity to drain mixers and agitators before the change out. After the new packings or mechanical seals are in place, the paper processing seal is deflated allowing the shaft to rotate freely. The same concept can be applied to the change out of marine propeller shaft seals.

Single Inflatable Bladder Expandable Mandrel

Custom designed circular bladders are designed for radial expansion outward. These bladders actuate metal buttons, lugs, or rubber shoes to grip on the inside of the core for winding and unwinding paper rolls in slitters or other converting and production operations.

Multi-Bladder Expanding Mandrel

Custom designed linear bladders are designed to run the length of the shaft and actuate metal buttons, lugs, or rubber shoes to grip on the inside of the core for winding and unwinding paper rolls in slitters or other converting and production operations.

Have questions about a product application you’re working on?